EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is a extremely effective solar controller suitable for off-grid photo voltaic techniques. Dependant on multiphase synchronous rectification technologies, it assures optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Important Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Essential options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
LCD Screen with actual-time info monitoring.
Numerous Load Manage Modes together with handbook and timer.
In depth Digital Protections from overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Phase-by-Phase Guidebook to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Preparing the Controller
Assure all factors are involved: Tracer AN device, temperature sensor, interaction cables, and user manual.
Confirm the product quantity and voltage ratings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a properly-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the supplied mounting brackets.
Retain right clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally comply with appropriate safety protocols and ensure the program is powered off before connecting factors.
Action 1: Connect the battery terminals to the demand controller (constructive to good, negative to destructive).
Phase 2: Join the photo voltaic panel array into the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load relationship.
Step 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability within the controller by connecting the battery to start with.
Make use of the LCD Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Regulate.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time monitoring utilizing the MT50 distant meter.
Data is often logged through the RS485 communication port working with computer software such as Solar Station Computer system.
Remote checking is possible While using the EPEVER WiFi module.
6. Troubleshooting Popular Troubles
Issue one: No Energy Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge two: About-Voltage Safety
Validate the solar array’s voltage ranking.
Adjust system parameters if necessary.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT configurations inside the menu.
Advantages of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification engineering makes sure:
Bigger Performance: Diminished energy losses through conversion.
Improved Dependability: Stable efficiency less than variable hundreds.
Lengthier Battery Daily life: Reliable and exact More info charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technology can be an exceptional option for optimizing solar power era and increasing battery everyday living. By pursuing the above mentioned setup information, buyers can make sure greatest performance and method longevity.