EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Charge Controller is actually a very effective photo voltaic controller made for off-grid photo voltaic methods. According to multiphase synchronous rectification technologies, it makes certain optimized Power conversion and procedure stability for a wide array of photovoltaic (PV) purposes.

Critical Features on the EPEVER Tracer AN Series Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technologies for remarkable solar Vitality harvesting. Critical attributes incorporate:

Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
State-of-the-art MPPT Algorithm with >ninety nine% efficiency.
Dual-Stage Charging for Increased battery life.
Liquid crystal display Display with actual-time facts monitoring.
Multiple Load Handle Modes which include handbook and timer.
Complete Electronic Protections in opposition to overcharging, about-discharging, shorter circuits, and reverse polarity.
Step-by-Stage Guidebook to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Preparing the Controller
Make certain all parts are involved: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Confirm the design range and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Pick out a properly-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller using the supplied mounting brackets.
Maintain proper clearance for warmth dissipation.
three. Wiring the Solar Charge More info Controller
Caution: Often stick to appropriate security protocols and ensure the system is driven off just before connecting elements.

Step 1: Connect the battery terminals to your charge controller (constructive to good, negative to negative).
Action 2: Link the photo voltaic panel array to your PV input terminals.
Move three: Link the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity within the controller by connecting the battery initial.
Use the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Checking and Info Logging
The Tracer AN Collection supports actual-time checking utilizing the MT50 distant meter.
Data might be logged via the RS485 interaction port making use of software for instance Photo voltaic Station PC.
Remote checking can be done Along with the EPEVER WiFi module.
6. Troubleshooting Typical Difficulties
Concern 1: No Ability Output

Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: Around-Voltage Safety

Validate the photo voltaic array’s voltage rating.
Change method parameters if needed.
Issue 3: No Battery Charging

Inspect PV wiring for continuity.
Affirm MPPT configurations within the menu.
Great things about the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification technological innovation makes sure:

Greater Effectiveness: Lessened energy losses in the course of conversion.
Improved Trustworthiness: Steady general performance under variable hundreds.
For a longer period Battery Life: Constant and correct charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification know-how can be an Outstanding choice for optimizing solar energy technology and extending battery life. By adhering to the above set up guide, customers can make certain greatest effectiveness and technique longevity.